Skip to main content
Chat on WhatsApp

High Precision Ultrasonic hardness tester NDT equipment GL-TIME5630

Ultrasonic Hardness Tester
NDT Ultrasonic Hardness Tester
Ultrasonic hardness tester NDT equipment
Ultrasonic hardness tester NDT equipment

High Precision Ultrasonic hardness tester is NDT On-site testing equipment ,Portable, highly accurate, easy and quick to operate.The UT machine High Precision UCI Hardness Tester (Ultrasonic Contact Impedance Tester)  by UCI Method, Quick and easy positioning with fixed bracket for batch inspection of workpieces,Rapidly detects the hardness of large workpiece, portable,high accuracy.

Main Features:

  • Power indication: icon display; alarm indication: low battery alarm;
  • A variety of hardness system can be converted to each other: universal HV, HB, HRC hardness value conversion;
  • Calibration function: hardness value calibration function, delete calibration function;
  • Material selection: can choose the test piece material, mainly steel and cast steel, the use of standard test block calibration can be used for alloy tool steel and special cast iron, non-ferrous metal measurement;
  • Storage: built-in 8G SD card, providing massive storage space;
  • Omni-directional free measurement: measurement in all directions can be measured directly without compensation;
  • Measured value display: can display the maximum value, minimum value, average value, standard deviation, the number of measurements, previous measurements.
  • Over-limit alarm: can set the upper and lower limits of hardness value, over-limit alarm prompts;
  • Display: 3.5-inch colour LCD;
  • Battery: rechargeable lithium-ion battery, continuous working time of not less than 30 hours;
  • Interchangeability: host and probe with split design, connected by cable, probe, host and probe protective cover can be interchanged;
  • Unique measurement bracket to meet the requirements of JB/T 9377-2010 ‘ultrasonic hardness tester Technical Conditions’ 3.6, so that the measurement is more stable.
Technical parameter

Test force

10N, repeatability ≤ 3% 

Indenter

Use a Vickers indenter with an angle of 136° ± 0.5° between the two opposing faces at the tip of the indenter, and any intersecting line between the opposing faces (transverse cutter) should be no greater than 0.005mm;

Hardometer resolution

1HV 

Measuring range

Vickers HV80-1042; Rockwell HRC20-70; Brinell HB 100-450

Hardness range

Maximum permissible value of display error

<250HV

±4%

250HV ~ 500HV

±4%

>500HV ~ 800HV

±5%

>800HV

±6%

Host external size 

169*73*37mm 

Host weight

About ≤500g 

Main Accessories

Mainframe 

1set

10N probe        

1pc

Connection cable 

1pc

Charger 

1set

Instruction manual 

1copy

Standard hardness block      

1 pc